Other

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: REVIVE / REVIVE 2.0

Service kit for 100 hr service (re-adjusting play and replacing wiper). Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, without line marking) - 1x Foam ring - 1x C-clip R12

Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12

BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts. The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear. - Suitable for all BikeYoke dropper posts - Size: 250ml (lasts for several full services)

Valve-extension-adapter. Allows easier access to your dropper valve for shock-pumps with short valve heads.

This BikeYoke allows the use of a standard shock in your Specialized bike. Stumpjumper 2010-2015 Includes: - 1x BikeYoke SJ01 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Give your Enduro MK3 stem a bit of extra bling and shave off a few grams at the same time. Includes: - 6x Enduro MK3 Stem Titanium bolts

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal to front and rear brakes. Frames and forks that use the post mount brake interface use a stock size that varies from 160mm - 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.