Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

Syncros FL2.0 Stem
$39.99
FL2.0 stems are designed to suit the more price conscious road or mountain biker. The stems are 3D forged from an advanced 6061 alloy to achieve the perfect balance of strength, stiffness, and weight, while the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar.
Syncros Fraser iC SL Handlebar
$349.99
Our one-piece cross country handlebar/stem combo is the ultimate in lightweight for the discerning XC rider. Based on our popular T-bar flat handlebar and a -8° stem in 3 different virtual extension options our carbon engineers have been able to make a considerable weight saving with the same performance. - XC World Cup level carbon bar - One piece construction. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -8° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
Syncros Fraser iC SL SE Bar/Stem
$449.99
A variant of our Fraser iC SL Special Edition, this version has a less extreme stem angle as preferred by Andri Frischnecht of the Scott-SRAM team. The stem has a minus 17 degree rise, 740mm width and our T-bar geometry with the weight savings and stiffness benefits that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem: -17° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm - Steerer Diameter: 1-1/8" - Clamp Diameter: iC (integrated Cockpit) - Carbon UD, Superlight Layup
Syncros Fraser iC SL Special Edition Handlebar
$449.99
Ridden by the best, our Fraser edition is designed according to the preferred geometry of the World and Olympic Champion. The stem has a minus 25-degree rise and our T-bar geometry with the weight savings that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - One piece construction - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -25° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
Syncros Hixon iC DH 800mm Bar/Stem
$349.99
For 2020 we took our iC (integrated Cockpit) concept and applied it to downhill to produce a light, stiff and strong one piece cockpit for the ultimate in downhill speed. At 300g in 800mm width it's not only one of the lightest bars available, but integrating the stem removes a huge amount of weight from the bike while the one-piece construction allows us to reinforce key areas to inspire confidence where it is needed. Our carbon engineers worked on the layup to find the perfect balance of stiffness, not too harsh, not too soft, but just right. - Carbon UD - Up Sweep: 5° up - Back Sweep: 8° back - 15mm Rise - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/8" - Weight: 300g
Syncros Hixon iC SL Handlebar 780mm
$329.99
The next evolution of our Integrated Cockpit concept, the Hixon iC is a truly revolutionary product. Thanks to a unique new construction method and high-quality carbon we have created a bar-stem combo designed for trail riding that weighs a scant 290g. - State-of-the-art carbon bar - ideal for All Mountain riding. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem - 15mm mini rise shape - 9° back sweep, 6° upsweep - Width: 780mm
Syncros RR1.0 Aero Bar/Stem 400
$549.99
RR1.0 Aero are crafted from high modulus carbon fiber to ensure precise steering in a lightweight, race-worthy design. The all-in-one combo offers clean lines from the drop to the steerer clamping area. The optimized carbon layup eliminates harsh road vibrations and reduces stress hotspots. The ergonomic bend provides you comfortable hand positions to mitigate fatigue keeping you both confident and in control. - Designed to be perfectly integrated with the new Scott Foil bike - Aero top section with compact drop and reach - Full cable and wire integration - Integrated accessory mounting threads - Stem Angle: 84 degree - Material: Carbon monocoque with forged alloy steerer
Syncros RR1.0 Aero Bar/Stem 420
$549.99
RR1.0 Aero are crafted from high modulus carbon fiber to ensure precise steering in a lightweight, race-worthy design. The all-in-one combo offers clean lines from the drop to the steerer clamping area. The optimized carbon layup eliminates harsh road vibrations and reduces stress hotspots. The ergonomic bend provides you comfortable hand positions to mitigate fatigue keeping you both confident and in control. - Designed to be perfectly integrated with the new Scott Foil bike - Aero top section with compact drop and reach - Full cable and wire integration - Integrated accessory mounting threads - Stem Angle: 84 degree - Material: Carbon monocoque with forged alloy steerer
Syncros RR1.0 Aero Bar/Stem 440
$549.99
RR1.0 Aero are crafted from high modulus carbon fiber to ensure precise steering in a lightweight, race-worthy design. The all-in-one combo offers clean lines from the drop to the steerer clamping area. The optimized carbon layup eliminates harsh road vibrations and reduces stress hotspots. The ergonomic bend provides you comfortable hand positions to mitigate fatigue, keeping you both confident and in control. - Designed to be perfectly integrated with the new Scott Foil bike - Aero top section with compact drop and reach - Full cable and wire integration - Integrated accessory mounting threads - Stem Angle: 84 degree - Material: Carbon monocoque with forged alloy steerer
Syncros RR1.0 Aero Carbon Stem
$59.99
The Syncros RR1.0 Aero Carbon stem is designed to be perfectly integrated to Scott's Foil bike (sold separately). The stem employs an intelligent pairing of aluminum and carbon fiber to achieve the perfect balance of strength, stiffness, and weight into the smoothest and cleanest design. The body is forged from an advanced 7050 aluminum before being reinforced with high-modulus carbon fiber. The broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Material: 7050 Aluminum - Weight: 165 grams (110mm)
Syncros RR1.5 Stem
$49.99
RR1.5 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
Syncros RR2.0 Stem
$39.99
RR2.0 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL6061 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
Syncros XM1.5 Stem
$39.99
The XM1.5 is designed for aggressive technical riders for use with an oversize 35mm bar for the strongest setup. - Designed for aggressive technical trail riding - Forged and machined AL2014 body - Wide 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8mm bars - Steerer Diameter: 1 1/8" - Lengths: 40-50mm - Angle: 2°
Syncros XR1.5 -17° Stem
$59.99
XR1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. This -17° stem was designed for the extreme riding position of some of our elite Cross Country World Cup stars.
Syncros XR1.5 -8° Stem
$49.99
XR1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: -8°
Syncros XR2.0 -8° Stem
$39.99
XR2.0 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL6061 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: -8°
Sunlite ATB/Urban Quill Stem
$27.99
• Forged aluminum • Anodized finish • 2-bolt clamp • 150mm tall
Sunlite Adjustable Quill Stem
$23.99 - $39.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
Sunlite Adjustable Quill Stem
$25.99
• Forged aluminum • 2-bolt clamp • 180mm tall
Sunlite Alloy 1-Bolt Quill Stem
$18.99 - $30.00
• Forged aluminum • Single-bolt clamp • 180mm tall
Sunlite Alloy ATB 4-Bolt Quill Stem
$25.99
• Forged aluminum • Classic streamlined shape • 4-bolt clamp • 180mm tall
Sunlite TCO Piston 2 Bolt-Clamp Quill Stem
$17.19
• Forged aluminum • 2-bolt clamp • 250mm tall (extra tall)
Sunlite Threadless Alloy Road Stem
$30.19
- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted
Sunday Freeze Topload Stem
$44.99
Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer the same stem used by the Sunday team at a very affordable price. - Reach: 52mm - Stack Height: 33mm - Rise: 34mm (1mm drop when inverted) - Clamp Bolts: M6 x 1.25mm pitch (x4) - Pinch Bolts: M6 x 1.25mm pitch (x2) - Weight: 10.5 oz
Specialized S-Works Venge Stem
$150.00
The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting
Specialized Turbo Vado Stem w/Display & Light Mount
$65.00
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
Spank Spank Split 35 Stem
$89.90
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Spank Spank Split Stem
$89.90
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Spank Spike 25/30 Direct Mount Stem
$74.90
Adjustable in both reach and rise, Spank's Spike 25/30 DM Stem allows the rider to find the ideal stance and balance point. 2D forged for strength, and CNC optimized to just 135g, this unique direct mount also features chamfered barclamp zones to reduce stress risers and improve fatigue life in any handlebars. As DH frames have gotten longer, shorter and more adjustable, direct mount cockpit designs have become a necessity. Developed with the World's Top DH pros, the Spike 25/30 DM Stem takes DH cockpit tuning to a new level. It's remarkably short reach was accomplished first by SPANK, by bringing the lockdown hardware into the barclamp, while maintaining the ease of set-up and resistance to moving under impact. - CNC machined 7075-T6 aluminum - Rise-adjustable: 28-33mm - Reach-adjustable: 25/30mm - Fits 2005-current BoXXer, Fox 40, Dorado, and 2012-current 888 forks
Spank Spike Race 2 Stem
$49.90
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos