Seatposts

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.

- Gravity-approved butted unidirectional carbon mast with black on black graphics - Uses the same two-bolt seat clamp found on the LEV, featuring titanium bolts - 188g (30.9mm)

NCX Suspension Seatpost - Alloy construction - Coil spring with preload adjuster - Brass pivot bushings

Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset

Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

- Carbon fiber mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position for micro tuning which allows for superior comfort and performance (no-offset clamp) - Unsurpassed strength to weight ratio - Specific to I-Beam saddle

A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel. - Black hard anodized stanchion and an air spring, hydraulically locked cartridge - Single-bolt alloy head - Remote sold separately

- Gravity-approved butted, heat treated aluminum mast with black on black graphics - Uses the same two-bolt seat clamp found on the LEV, featuring titanium bolts - 260g (30.9mm)

Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head

Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle. - Low-profile clamp reduces stress on lightweight rails - 2-bolt design securely holds the saddle in place and is easy to adjust - Offset: 25mm - Clamp Style: Standard Rails - Material: Carbon

Comp Carbon Zero Setpost

- 3D forged one piece shaft and clamp base with robust cradle and top clamp - Length: 400mm - Turned CNC finish with a degree of texture for a positive clamp grip - Tough 6mm hardware, 0.5" clamp offset - 280g (27.2mm)

The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head

Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy

- UD carbon shaft bonded to an AL6061-T6 alloy top clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - ISO-Mountain safety certified

Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)

Bike fit is important - a bike should feel like an extension of the body, especially when dialed in. Getting just the right saddle position is second-to-none when putting out power over long miles is concerned. Ritchey Link posts offer two clamp positions for greater adjustability in dialing in the right fit. - 7050 Alloy 2pc Press Fit Head - 15mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Finish: BB black

Bike fit is important. A bike should feel like an extension of the body, especially when dialed-in. Getting just the right saddle position is second-to-none when putting out power over long miles. Ritchey Link posts offer two clamp positions for greater adjustability in dialing-in the right fit. - 7050 Alloy 2pc Press Fit Head - 20mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Length: 350mm

The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams

The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams

FSA's Afterburner is a tough, lightweight seatpost that works great on road and mountain bikes. Its 1-piece 3D-forged aluminum construction makes it strong and stable while remaining light. And, it's super easy to adjust thanks to the convenient 2-bolt clamp.

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

Whether it's a cross remount, an unexpected pothole, or a rough line down the trail, the WCS Zero post will not relinquish its position. Featuring a confidence-inspiring extra-secure fore/aft bolt system, the Zero post is second-to-none in ease of installation and fit adjustment. - Fore/aft adjustment bolts for precision adjustment and secure clamping - 3D Forged 2014 Alloy - Offset: Zero - Cradle: Standard saddle rail clamp

The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Material: 2014 alloy - Total length: 400mm (including 100mm of minimum insert) - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 240g (27.2x400mm)

- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles

3D forged one-piece AL7050-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified

Ritchey's WCS 1-Bolt Seatmast Topper makes saddle installation and adjustment super easy. It's constructed of forged aluminum for strength and the single bolt clamp makes it very simple to find your perfect saddle position. Furthering the ideal fit, the WCS Seatmast Topper comes in 50mm and 70mm lengths and different offsets.