Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Headsets

$30.99
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$31.95
For bikes with press-fit head tubes, the Ritchey Comp Press Fit headset stands out above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. The upper bearing is a sealed cartridge, while the lower bearing is coated in titanium. - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Lower Fit (S.H.I.S.): ZS44/30, ZS55/40, ZS55/40 - Lower HT OD/ID: 50/44, 61/55, 61/55 - Material: CroMo - Top cap: 7.3 or 12.4mm - Upper Bearing: Sealed cartridge - Lower Bearing: Ti coated, sealed cartridge - Weight: 83g (7.3mm), 103g (12.4mm)
$32.00
Replacement headset uppers from FSA - Internal HS Upper Orbit-Z - Steerer diameter: 1-1/8" - ZS44/28.6 (36 x 45) - 5.3/13.1mm
$32.95
The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion. - Bearing: Semi cartridge - Material: Steel - Stack Height: 30.2mm
$32.95
Comp Logic Threadless Headset - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion
$32.95
Works specifically with the Ritchey Switch Stem (part #RC1560-64) to route \ncables, wires, and hydraulic lines from the handlebar through to the bicycle frame.
$32.99
Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$33.95
Designed for bicycles with press-fit headsets, the Classic Press Fit Upper Headset features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Press Fit Upper headset adds that classy detail your bike deserves. - Top cap: 7.3 - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44mm - Bearing: Sealed cartridge - Finish: High-polish silver - Weight: 43g (7.3mm)
$33.95
The Ritchey Comp Cartridge Press Fit Upper Headset features full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 7.3 or 12.4mm - Material: CroMo - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Sealed cartridge - Weight: 43g (7.3mm), 51g (12.4mm)
$33.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features semi-cartridge high-quality bearings. - Material: Steel - Top Cover OD: 46mm - Bearings: Semi-cartridge - Weight: 74-83g
$33.99 - $44.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.
$34.95
Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.
$34.95
Headset bearings for Wolf Tooth headsets. - Replacement bearings
$34.95
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Performance Headsets with Enduro black oxide bearings have a one-year warranty. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Lower assembly features: - Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions. - All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality. - Service and additional parts available.
$34.99
The lightweight Orbit UF uses a mixture of bearing types, with caged ball bearings in the top race and sealed cartridge angular contact bearings in the bottom race. Upper and lower water seals keep the elements at bay. - Forged and CNC machined 6061/T6 Aluminum cups - Patented alignment tip for increased durability and performance - Upper cup uses double sealed 5/32" ball bearings - Lower cup uses a black seal angular contact bearing - Laser etched aluminum top cap - Weight: 99g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$34.99
• Aluminum • Semi-sealed mechanism • 1 1/8 inch • S.H.I.S.: EC34/28.6, EC34/30
$34.99
KEY FEATURES: - Fits Scott Addict and Solace bikes Addict, Solace, 1 1/8" - 1 1/4" Tapered, Drop-In, IS41/28.6 | IS46/34, Alloy, sealed cartridge, 9.0mm stack height BEARINGS: sealed cartridge bearings FEATURES - For Scott Addict and Solace Bikes
$35.49
WeThePeople's Compact Headset is designed for integrated BMX headtubes and comes with two 3mm Spacers. - 16mm top cap - Two 3mm spacers included - Precision cartridge bearings - Weight: 104g
$36.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC49/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 76.57g
$36.00
ABI Headset Bearing for new builds or replacements.
$36.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g
$36.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This carbon fiber beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Upper Bearing OD: 41.8 - Top Cover OD: 46mm - Bearing: Sealed cartridge, Ti-coated - Weight: 36g
$36.95 - $42.95
Designed for bicycles with press-fit headsets, the WCS Press Fit Lower Headset features full-complement, stainless steel, angular contact cartridge bearings packed with Ritchey high-webbing grease and corrosion-resistant Ti-coated bearings. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 34-54g
$36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS49/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 58g
$37.00
- 15.2mm/9.7mm CF IS-2-138 - 1-1/8" / 1-3/8", 36°/ 45° ACB - For tapered 45mm / 52mm OD head tube - For 1-1/8" to 1-3/8" tapered fork - Carbon fiber top cover - Angular Contact Bearing (black seal) - Stack Height 16.1mm - 65.4 grams
$37.67
ABI Headset Bearing for new builds or replacements. - Enduro Headset Bearing ACB 4545 137 Stainless 37 x 46.85 x 7 mm: 45 x 45
$37.95
Sealed cartridge bearings that drop directly into the head tube. - Upper includes top cap - S.H.I.S.: IS52/28.6 - Stack: 8.3mm
$39.95 - $45.95
Bringing Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting, Tom Ritchey designed a unique headset that allows the cables to be run internally from the stem into standard frames without requiring the frame or fork to be modified. The Logic-E headset is designed to allow Shimano Di2 and STEPS cables to be concealed from view and the wind while protecting them from damage. - Steerer size: 1-1/8" upper - Drop-in (IS) or Press-Fit (S) - Weight: 35-44g
$39.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headsets are built with Enduro black oxide bearings and have a one-year warranty. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Upper assembly features: - Ultralight Stem Cap With Integrated Spacer plus an aluminum bolt and a star nut. - 7mm top cover = 8mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing. - Bearing top cap outer diameter 45.8 mm
$39.95
Wolf Tooth Premium headsets feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty - Lower Bearing, includes race
$39.95
Headset bearings for Wolf Tooth headsets. - Replacement bearings
$39.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC34/28.6/H16/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 50g
$39.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/UD|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: UD Carbon • Weight: 72g
$39.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g
$39.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals
$39.99
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$39.99 - $49.99
The Origin8 Twistr Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut
$39.99
KEY FEATURES: - Fits Scott Addict family MY22 Replacement headset for the Scott Addict product family Model year 22 onwards. BEARINGS: Sealed cartridge bearings FEATURES - Compatible with Addict product family MY22
$39.99
- Foil MY12 1 1/8"-1 1/4" Tapered - Press Fit - ZS44/28.6 | IS46/34 - Alloy - Sealed cartridge - 10.1mm stack height
$40.00
- Steel cup semi-integrated design - Alloy top cap with hollow bolt allows for brake cable pass-through - Caged bearing 5/32" x 22A - ED Black durable finish - SHIS: ZS44/28.6|ZS44/30 - Steerer OD: 28.6mm - Cup: 44mm - Race: 30mm - Stack Height: 9.4mm
$40.00
Replacement headset uppers from FSA. - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Upper: IS41 - Upper Stack Height: 8.2
$40.99
A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$41.99
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap
$42.00
FSA ACR (Aerodynamic Cable Routing) Headsets are suitable for both road and MTB riding styles and feature angular contact bearings. - A fully integrated cable routing - No rotation limit - ACR top cover - Angular contact bearing - Specific frame required - 1.5" headtube - 36°/45° ACB - For 55.8mm OD headtube - For 1-1/8" to 1.5" tapered fork - Stack height 10.4+0.5=10.9
$42.00
-Tapered OD2 headset (2012-2016)
$42.00
-Integrated tapered headset for TCR model
$42.00
-Zero stack headset for XTC models
$43.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g
$44.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 33.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 88.29g
$44.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
$44.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Upper assembly features: - Ultralight Stem Cap With Integrated Spacer plus an aluminum bolt and a star nut. - 5mm top cover = 16mm total stack - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing.
$44.95
Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion
$44.99
Box Two™ Integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and solid crown race with super-smooth rolling, angular contact bearings. FEATURES - Precision Sealed Bearings COMPATIBILITY - Box One XS Fork - Box One XE Fork - Box One Stem Lock - Frames with a 1" Integrated NON-Tapered Head-Tube
$44.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS41/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 41.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Weight: 24.91g
$44.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC49/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 76g
$44.99
This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$44.99
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.