Parts

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

This BikeYoke allows the use of a standard shock in your Specialized bike. Stumpjumper 2010-2015 Includes: - 1x BikeYoke SJ01 - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

Selle Royal's Journey is one of the plushest saddles available. Its RoyalGel padding eliminates pressure points for maximum comfort on every ride. Plus, elastomers smooth over bumps and RVL technology provides excellent water resistance.

Specialized's Purgatory 2Bliss Ready tire is the standard bearer for trail tire performance. By applying FE Analysis to the Purgatory, they've optimized the tread to bite hard in loose corners, while legendary GRIPTON compound results in a faster, grippier tire for any all mountain excursion. Of course, the 2Bliss Ready design is the icing on the cake, allowing you to run lower tire pressures and all but eliminate the risk of pinch flats. - Casing: 60 TPI - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON - 26 x 2.3" PSI 25-50; approximate weight 690g

So light you'll forget they're there, Specialized's S-Works Carbon Overendz Bar Ends increase available hand positions and provide awesome leverage for climbing. They're made from Specialized's FACT carbon for feathery low weight and serious strength, while the ergonomic design offers outstanding comfort. Plus, the flush clamp design provides smooth and quick transitions from bar to bar end giving you more hand positions, which is great for long rides.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Replacement piston and seals for Hope disc brake calipers.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.