Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Specialized's Purgatory 2Bliss Ready tire is the standard bearer for trail tire performance. By applying FE Analysis to the Purgatory, they've optimized the tread to bite hard in loose corners, while legendary GRIPTON compound results in a faster, grippier tire for any all mountain excursion. Of course, the 2Bliss Ready design is the icing on the cake, allowing you to run lower tire pressures and all but eliminate the risk of pinch flats. - Casing: 60 TPI - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON - 26 x 2.3" PSI 25-50; approximate weight 690g
So light you'll forget they're there, Specialized's S-Works Carbon Overendz Bar Ends increase available hand positions and provide awesome leverage for climbing. They're made from Specialized's FACT carbon for feathery low weight and serious strength, while the ergonomic design offers outstanding comfort. Plus, the flush clamp design provides smooth and quick transitions from bar to bar end giving you more hand positions, which is great for long rides.
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.40
Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.50
RaceFace Crank Arm Fixing Bolts - M15
$0.79
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
$0.90
- Aheadset preload adjusting bolt
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$0.99
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
$1.00
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00
Service parts for Fox suspension.
$1.00
Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers
$1.00
- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push
$1.05 - $2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
$1.20 - $1.98
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.58
KS Dropper Post Service Parts
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.59
- Model: Replacement bolt - Compatibility: Allen, M5x16
$1.79
Replacement bearing for the lower half of YST8003 #7 headset.
$1.79
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$1.84 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Page 1 of 350 Next page